Phoenix Bluetooth seriële poortadapter Manual descarregar pdf (Página 10)

BLUETOOTH AT COMMAND LIST

7749_de_00 PHOENIX CONTACT 10

Bond (AT*AGB=)

Un_Bond (AT*AGUB=)

AT Command Description

AT*AGB=<bd_addr><CR> Performs a GAP bond procedure with another Bluetooth de-

vice.

During the bonding procedure the fixed PIN code is used,

see the Write_Fixed_PIN and Read_Fixed_PIN commands.

Note that to be able to perform bonding the remote device

must be in pairable mode.

Command Parameters Type Value

bd_addr Bd_Addr Bluetooth device address of the device to bond with.

Responses Description

<CR><LF>OK<CR><LF> Successful response

<CR><LF>ERROR<CR><LF> Error message.

Module Constraint

FL BT SPA Not supported. Bonding is automatic when connecting if eit-

her of the sides enforces security. The link keys are stored in

a FIFO of size five.

AT Command Description

AT*AGUB=<bd_addr><CR> This command un-bonds a previously bonded device.

Command Parameters Type Value

bd_addr Bd_Addr Bluetooth device address of the device subject to un-bond.

If address FFFFFFFFFFFF is selected all bonded devices will be remove.

Responses Description

<CR><LF>OK<CR><LF> Successful response

<CR><LF>ERROR<CR><LF> Error message.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 42 43

Sem comentários

Phoenix Bluetooth seriële poortadapter Manual Página 10