Phoenix Bluetooth seriële poortadapter Manual descarregar pdf (Página 12)

BLUETOOTH AT COMMAND LIST

7749_de_00 PHOENIX CONTACT 12

Write_Fixed_PIN (AT*AGFP=)

Read_Local_Name (AT*AGLN?)

Write_Local_Name (AT*AGLN=)

AT Command Description

AT*AGFP=<pin_code>, <store_in_startup_database><CR> Writes the fixed PIN code used by the Serial Port Adapter du-

ring bond.

Command Parameters Type Value

pin_code string The PIN code is a string of one to sixteen alphanumerical characters.

It is recommended to use a pin code of at least eight characters of mixed type,

e.g. “12w35tg7”.

The default value is “0”.

store_in_startup_database enumerator 0: The setting will only be valid for the current power cycle.

1: The Serial Port Adapter will remember the setting between power cycles. The

settings database in the Serial Port Adapter will be updated.

Responses Description

<CR><LF>OK<CR><LF> Successful response.

<CR><LF>ERROR<CR><LF> Error response.

AT Command Description

AT*AGLN?<CR> Reads the local Bluetooth device name.

Responses Description

<CR><LF>*AGLN:<device_name><CR><LF>OK<CR><LF

Successful response

<CR><LF>ERROR<CR><LF> Error message.

Response Parameters Type Value

device_name string Max 240 characters.

The default name is “Bluetooth Device”.

AT Command Description

AT*AGLN=<device_name>,

<store_in_startup_database><CR>

Writes the local Bluetooth device name.

Command Parameters Type Value

device_name string Max 240 characters.

The default name is “Bluetooth Device”.

store_in_startup_database enumerator 0: The setting will only be valid for the current power cycle.

1: The Serial Port Adapter will remember the setting between power cycles. The

settings database in the Serial Port Adapter will be updated.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 42 43

Sem comentários

Phoenix Bluetooth seriële poortadapter Manual Página 12