Phoenix Bluetooth seriële poortadapter Manual descarregar pdf (Página 20)

BLUETOOTH AT COMMAND LIST

7749_de_00 PHOENIX CONTACT 20

Read_Default_Client_Profile (AT*ADDCP?)

Write_Default_Client_Profile (AT*ADDCP=)

Responses Description

<CR><LF>OK<CR><LF> Successful response.

<CR><LF>ERROR<CR><LF> Error response.

AT Command Description

AT*ADDCP?<CR> This command reads the default client profile. The default cli-

ent profile is the profile that the Serial Port Adapter uses

when it establishes a connection, in data mode, to the default

remote peer(s).

Responses Description

<CR><LF>*ADDCP:<role_and_profile><CR><LF>OK<CR

><LF>

Successful response.

<CR><LF>ERROR<CR><LF> Error response.

Response Parameters Type Value

role_and_profile Enumerator 0: Serial Port Profile (DevA role)

1: Dial-Up Networking Profile (DT role)

2: LAN Access Profile (LAN Access Point role)

255: No profile (default value)

AT Command Description

AT*ADDCP=<role_and_profile>,

<store_in_startup_database><CR>

This command reads the default client profile. The default cli-

ent profile is the profile that the Serial Port Adapter uses

when it establishes a connection, in data mode, to the default

remote peer(s).

Command Parameters Type Value

role_and_profile Enumerator 0: Serial Port Profile (DevA role)

1: Dial-Up Networking Profile (DT role)

2: LAN Access Profile (LAN Access Point role)

255: No profile (default value)

store_in_startup_database Enumerator 0: The setting will only be valid for the current power cycle.

1: The Serial Port Adapter will remember the setting between power cycles. The

settings database in the Serial Port Adapter will be updated.

Responses Description

<CR><LF>OK<CR><LF> Successful response.

<CR><LF>ERROR<CR><LF> Error response.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 42 43

Sem comentários

Phoenix Bluetooth seriële poortadapter Manual Página 20